Electric worm gear winch 125 - 2000 kg - 230V

The range of electric worm gear winches in combination with 230 Volts that Gebuwin offers, start from 125 kg up to 2.000 kg. Electric worm gear winches are used in heavy duty pulling situations. The most common application is the pulling of loads, however upon request, these winches can be delivered as hoisting winches.

Product specifications

  • Compact and robust construction
  • All rotating parts run in maintenance free bearings
  • Only used for pulling loads.
  • Click here to contact Gebuwin for more information on electrical winches for hoisting loads. Note that for electrical winches with a hoisting function a limit switch and a low voltage control is required.
  • Standard paint finish in grey (RAL 7035) and black (RAL 9005) according to DIN 12944, C1M
  • Constructed with a worm gear transmission as centre point between the electromotor and cable drum
  • Constructed with a covered and sealed gearing (IP54) and insulation classification B
  • Winches from 1,000 kilo’s and up are standard equipped with an overload protection
  • The connection duration is S3 – 40% – 120 c/h
  • Available in 230 Volts and 400 Volts
  • The pendant control switch has a standard length of 1 meter
  • Maintenance free ball bearings
  • More cable storage than standard 30 meters by steps of 10 meters


  • EV = Zinc plated finish with a minimum of 6 microns
  • EX = ATEX certified, for zones 2 and 22
  • GD = Grooved cable drum
  • XD = Multiple (X) cable compartments possible, click here to contact Gebuwin for specific requests
  • Limit switch for hoisting applications
  • Low voltage control (42 Volts)
  • Radio control
  • Frequency control
  • Free spool cable drum possibility from EW250 and higher
  • Wall mounted control switch instead of pendant control switch
  • Electrical overload protection for EW990 and under
  • Possibility to switch between 2 speeds only for the EW125, EW250 and EW500 400 Volt versions
  • Electrical winches with double the standard speed


  • Steel or stainless steel cable with eye and/or hook, click here for more technical information


Technical specificationsEW125EW250EW500EW990EW1000EW2000
1st cable layer (kg)12525050099010002000
Last cable layer (kg)901803407807801560
Cable speed 1st layer (m/min)7,8 (15)5 (10)2,5 (5)4,54,54,5
Diameter cable (mm)4468811
Max. cable storage (m)323530303030
Min. breaking load cable (kN)5918363670
Motor output (kW)0,37 (0,75)0,37 (0,75)0,37 (0,75)1,31,31,3
Current (A)4 (5,2)4 (5,2)4 (5,2)9,19,19,1
Own weight (kg)2737408888160

( ) = version with double cable speed subject to changes

Receive a quote Download product sheet Download product manual