Spur gear winch 150 kg

This robust spur gear winch is used to hoist a load of up to 150 kg and can easily be mounted to a wall. The hoisting capacity is calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, this spur gear winch has a high performance efficiency and the robust design gives the spur gear winch a long lasting service.

Product specifications

  • Robust construction
  • Standard version with single cable drum
  • Primarily used for hoisting loads, also used for pulling
  • Adjustable crank and recoil free
  • High performance efficiency due to minimal friction loss in transmission
  • Equipped with a load pressure brake
  • All rotating parts run in maintenance free bearings
  • Static safety minimum factor 4
  • Standard wall mounted, see here for floor (console) mounted versions
  • The numbers in the product name correspond with the hoisting capacities on the first cable layer
  • Standard paint finish in grey (RAL 7035) and black (RAL 9005) according to DIN 12944, C1M
  • Cable outlet possible upward, downward and side ways

Options

  • EV = Zinc plated finish with a minimum of 6 micron
  • EX = ATEX certified, for zones 2 and 22

Accessories

  • Steel or stainless steel cable with eye and/or hook, click here for more technical information
  • Pulley blocks, click here for more technical information

Technical specificationsTL150
1st cable layer (kg)150
Last cable layer (kg)68
Crankforce 1st cable layer (daN)11
Hoisting length by one rotation, 1st layer (mm)122
Max. cable storage (m)13
Diameter cable (mm)4
Min. breaking force of cable (kN)9
Own weight (kg)4

 

Receive a quote Download product sheet Download product manual