Spur gear winches 1000 - 1500 kg

The spur gear winches TL1000 and TL1500 are used to hoist a load of resp. 1000 and 1500 kg and can easily be mounted to a wall. The hoisting capacity is calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, these spur gear winches have a high performance efficiency and the robust design and closed spur gear box gives the winches a long lasting service. The spur gearboxes are also offered as a separate product. For more information, go to the spur gearboxes product page here.

Product specifications

  • Robust construction
  • Standard version with single cable drum
  • Primarily used for hoisting loads, also used for pulling
  • Adjustable crank and recoil free
  • High performance efficiency due to minimal friction loss in transmission
  • Equipped with a load pressure brake
  • All rotating parts run in maintenance free bearings
  • Static safety minimum factor 4
  • Standard wall mounted, see here for floor (console) mounted versions
  • The numbers in the product name correspond with the hoisting capacities on the first cable layer
  • Standard paint finish in grey (RAL 7035) and black (RAL 9005) according to DIN 12944, C1M
  • Sealed spur gear casing according to protection classification IP44


  • SS = Stainless steel SAE grade 304
  • EX = ATEX certified, for zones 2 and 22


  • Steel or stainless steel wire rope cable with eye and/or hook, click here for more technical information
  • Pulley blocks, click here for more technical information


Technical specificationsTL1000TL1500
1st cable layer (kg)10001500
Last cable layer (kg)614927
Crankforce 1st cable layer (daN)1112
Hoisting length by one rotation of the crank, 1st layer (mm)2014
Cable capacity (m)3321
Diameter cable (mm)810
Min. breaking load cable (kN)3451
Own weight (kg)2727,5
Receive a quote Download product sheet Download product manual