Spur gear winches 300 - 600 kg

The spur gear winches TL300 and TL600 are used to hoist a load of resp. 300 and 600 kg and can easily be mounted to a wall. The hoisting capacity is calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, these spur gear winches have a high performance efficiency and the robust design gives the winches a long lasting service.

Product specifications

  • Robust construction
  • Standard version with single cable drum
  • Primarily used for hoisting loads, also used for pulling
  • Adjustable crank and recoil free
  • High performance efficiency due to minimal friction loss in transmission
  • Equipped with a load pressure brake
  • All rotating parts run in maintenance free bearings
  • Static safety minimum factor 4
  • Standard wall mounted, see here for floor (console) mounted versions
  • The numbers in the product name correspond with the hoisting capacities on the first cable layer
  • Standard paint finish in grey (RAL 7035) and black (RAL 9005) according to DIN 12944, C1M
  • Cable outlet only upwards


  • EV = Zinc plated finish with a minimum of 6 micron
  • EX = ATEX certified, for zones 2 and 22


  • Steel or stainless steel cable with eye and/or hook, click here for more technical information
  • Pulley blocks, click here for more technical information


Technical specificationsTL300TL600
1st cable layer (kg)300600
Last cable layer (kg)172336
Crankforce 1st cable layer (daN)610
Hoisting length by one rotation of the crank, 1st layer (mm)3228
Cable capacity (m)3512
Diameter cable (mm)46
Min. breaking load cable (kN)917
Own weight (kg)1011
Receive a quote Download product sheet Download product manual