2 drum compartment - The winch is suitable to be used with two wire rope cables on the drum
Grooved drum - A grooved drum assures that the first layer of rope wraps properly and evenly within the groove pattern. When the first layer is properly established, additional layers are more likely to also cooperate with the desired, even-layer wrapping. A pressure roller is often used together with a grooved drum.
Pressure roller - Pressure rollers improve the spooling of the rope. The rollers reduce the slack and avoid tangle of the rope which lead to that the wire winds better on the drum. The pressure rollers increase the lifetime of the rope and is it often used with a grooved drum.
Suitable to use with webbing belt - The drum is made suitable to be used with a webbing belt of 50 mm in width and 2 to 3 mm thick.
Free spool - Device for pulling applications. The drum can be disengaged from the winch making it possible to unwind the cable from the winch without having to use the crank
Free spool with brake - Same device as the free spool but a brake is added for controlled cable unwinding
Suitable for floor mounting - The frame of the winch is made suitable to mount the winch on a floor or console
ATEX certified - The winch is suitable for use in locations where there is a risk of explosion under atmospheric conditions for zone 2 and 22
Limit switch - A limit switch is required when the winch is used for lifting loads. The limit switch is a device that is installed directly on the drum shaft. You can set an upper and lower limit to ensure the winch will stop when these limits are reached.
